Skip to main content

Products

Browse through our great selection of professional hair cutting shears, thinners, and more!
Sale
Sold Out

YS Park Carbon Tiger Hair Brush 680

YS Carbon Tiger Hair Brush 680 is a Genuine and Authentic YS Park brush sold in the box. A powerful brush made with 100% natural boar bristles, and special Heat Resistant Pins, that come in seven sizes to accommodate all blow drying needs giving faster drying time, resulting in less heat damage.YS Park Carbon Tiger Series is designed with 30% higher concentration of Boar Bristles, and longer pins than the G Series Brushes. This will put more tension or pull on the hair and will give the user or stylist better straightening with this extra tension.The long heat resistant pins smoothly grab, and straighten the hair while the shorter boar bristles create gleaming curls and a perfectly finished style.
$75.00 $69.00
Sale
Sold Out

Aikyo ACPK Shear

Aikyo ACPK Peacock Handle Hair Cutting shear. ACPK is designed with decorative handle and tension knob with colorful designs of a peakcock. Convex edge designed for comfort, and control. This ACPK is designed with 440C Stainless Steel Alloy made in Korea.Tension is from an internal click tension. An attractive cutting shear. 
$275.00 $249.00
Sale
Sold Out

Shisato Debut L-T Left Handed 3 Ring Shear

Shisato Debut L-T Left Handed 3 Ring Hair Cutting Shear is designed with extra finger ring for extra control and comfort. The offset crane handle will give you a comfortable cutting position, and lower your elbow preventing stress on the wrist. Debut L-T is hand forged in Korea with Japanese 440-C Stainless Steel Alloy. Blades have a convex edge for smooth cutting. One size available is 5.5 inch Weight 1.6 oz.
$269.00 $239.00
Sale
Sold Out

Dynasty 25 Tooth No Line Thinner

Shisato Dynasty No Line Thinner is an affordable good quality thinning shear that does not leave a cut line in the hair.The back blade of this thinner is a solid blade that is blunt, and when you cut with this thinner it does not leave a line in the hair. Has an offset handle with an bent anatomical thumb for comfort.Finger rest is designed a bit shorter but wider for comfort. Blades are convex edge for a smooth cut. 
$189.00 $169.00
Sale
Sold Out

Leather shear case LC3034 with zipper holds 18 shears

Large and wide zipper case holds up to 18 multi cutting tools and accessories. Made of finest cowhide leather for durability and smoothness with thick Nylon Zipper. Similar to the LC-2034 with one extra row of pockets. Our largest case.
Items shown in case not included for display only.

      Material:
  • Cowhide Leather

Dimensions of Case Closed

Width:     6.0  inches
Length:  11.00 inches
$75.00 $65.00
Sale
Sold Out

YS Park 254 Short Hair Design Comb

YS Park 254 Short Hair Design Barber Comb is made using Ultem plastic to be durable, and very flexible.YS 254 Comb measures 7.25 inches, and  is strong yet gentle on the hair and heat resistant to 220 C / 428 degrees F. YS 254 has holes on the body of the comb to increase flexibility, and ensure a sure grip.
$12.50 $7.95
Sale
Sold Out

Shisato Debut L-S Left Handed Swivel

Shisato Debut L-S True Left handed Rotating Thumb swivel shear. Hand forged in Korea with Japanese 440-C Stainless Steel Alloy and convex edge blades. The ergonomic design of the handle creates extra spacing between thumb and finger ring to prevent and reduce finger and hand fatigue. Rotating thumb helps lower elbow, and prevent stress on the wrist and carpal tunnel syndrome. Weights 5.0 inch 1.5 oz, 5.5 inch 1.6 oz 6.0 inch 1.8 oz.
$269.00 $239.00
Sale
Sold Out

Kasho Millennium DLC Series

The Kasho Millennium Series DLC Professional Hair Cutting Shear is made of extremely high quality Cobalt stainless steel alloys combined with Kasho's unique sealed thrust ball bearing ride-less pivot system.This model has a  DLC coating which is a diamond like carbon coating extremely hard, and will extend durability of the edge. The DLC will also increase the smooth cutting of the shear , and will also protect this scissor from abrasions or scratches and harsh chemicals. This sharp and elegant design features an offset crane handle which is very comfortable.  This shear is one of the most advanced shears made. It is light weight, smooth and well-balanced. A true haircutting experience. Manufactured using a sintered or powered Cobalt Alloy Steel injected under high pressure  gives this shear a high degree of density, and excellent edge. This complex process combined with the sealed disk tension system that reduces friction to near zero produces an effortless cutting experience. We recommend that you do not oil this shear. Oil may effect the smooth operation of the sealed disk tension system. Tension Key Included.


 
$1,540.00 $1,232.00
Sale
Sold Out

Aikyo GS Curved Shear

Aikyo GS-C 8.0 inch Curved Grooming shear designed with Japanese 440C High Carbon Stainless Steel Alloy. Aikyo GS Curved is finished in Korea.Tension has a click Adjustable knob, and spring plate washer to stabilize the blade movement. A permanent finger rest, and Anatomical Bent thumb ring for comfort are also featured. Aikyo GS Blades are designed to cut with power.
$225.00 $195.00
Sale
Sold Out

Kasho Damascus Professional Hair Cutting Shears

Kasho Damascus Professional Hair Cutting Shear KAD is a Japanese Masterpiece. This series combines old forge traditions with state of the art technology. The maximum sharpness, hardness and durability of the edges are achieved using the renowned wear resistance of the Premium V-10 Cobalt Alloy Steel . The Damascus steel is then carefully layered on top to produce the beautiful Damascus patterning. A unique "flat screw" system with integrated ball bearing ensures a silky smooth operation. The convex and hollow ground blades are finely mirror polished. The Kasho Damascus series represents the ultimate in hand finished sophistication.
$1,650.00 $1,320.00
Sale
Sold Out

Sensei EVO-T 35 Hair Thinning Shears Sizes: 6.25 inches

Sensei EVO-T 35 Hair Thinning Shear is a state of the art blending shear. The steel of high quality Cobalt Molybdenum Alloy from Japan. A ball bearing tension system will give smooth blending and comb out performance. Metal to metal were is eliminated by Polymer Glide pivot inserts. The handle is a version of the original Hineta crane design. The soft slant of the teeth provide a softer more natural finish. Each tooth has a step down for free release which also create more space between the teeth for slice cutting in thicker sections.
 
$519.95 $469.95
Sale
Sold Out

Dynasty Iris Left Handed

Dynasty Iris True Left Handed hair cutting shear features floral design engravings on the handles,and Tension Dial.Hand Forged in China using Japanese 440-C Stainless Steel Alloy with a convex edge and offset handle with a slight  Anatomical Thumb.This is when the thumb ring is bent slightly for comfort.Price economically 
$179.00 $159.00
Sale
Sold Out

Aikyo GS Staight Shear

Aikyo GS-S 8.0 inch Straight Grooming shear designed with Japanese 440C High Carbon Stainless Steel Alloy. Aikyo GS Straight is finished in Korea.Tension has a click Adjustable knob, and spring plate washer to stabilize the blade movement. A permanent finger rest, and Anatomical Bent thumb ring for comfort are also featured. Aikyo GS Blades are designed to cut with power.
$225.00 $195.00
Sale
Sold Out

Sensei REVO Rotating Thumb Professional Hair Cutting Shears

Sensei REVO Rotating Thumb Professional Hair Cutting Shear. The REVO is state of the art shear designed with  high quality Japanese Cobalt Molybdenum Alloy which is Cryogenically tempered.A ball-bearing tension gives a smooth cut, and leaf-spring system that will reduce friction allowing stylist to cut with less thumb pressure, and fatigue it will  feel like new for many years. Metal to metal wear in the pivot area of the shear is eliminated by our Polymer Pivot inserts. The handle is a high tech version of our tribute to the original Hineta crane design, simply beautiful. The rotating handle turns effortlessly on a sealed ball-bearing assuring years of precision performance.
 
$519.95 $469.95
Sale
Sold Out

TARA KH-DRT

TARA KH-DRT scissor is a unique double rotating thumb and allowing the thumb to pivot as well. It is designed with one of the highest quality steels in the industry Multi Alloy Miracle Steel. The composition of this high grade steel which is a combination of Alloys including Super Cobalt Alloy, Carbon, Tungsten, Molybdenum and others. This combination of alloys allows the Tara KH-DRT to have a Rockwell hardness much higher that all other cobalt alloy shears. The hardness is near 70 on the Rockwell scale. This gives a very long lasting blade and edge. State of the art TARA Double Rotating thumb Shear. Smooth, zero resistance swivel for greater control. Offset, Anatomic bent them handle will allow to use with ease and comfort. Performance. The Joy of cutting and creativity will make this scissor your favorite cutting tool.

Sizes: 5.5 inch, 5.8 inch and 6.3 inch
$1,199.00 $925.00
Sale
Sold Out

Dynasty Iris Left Handed 30 Tooth Thinner

Dynasty Iris Left Handed 30 Tooth Thinner features floral design engravings on the handles,and Tension Dial.Hand Forged in China using Japanese 440-C Stainless Steel Alloy with a convex edge and offset handle with a slight  Anatomical Thumb.This is when the thumb ring is bent slightly for comfort.Iris is 6.0 inches in length. Price economically 
$179.00 $159.00
Sale
Sold Out

YS Park 452 Straight Shine Styler Brush

YS Park 452 Straight Shine Styler Hair Brush has features an "Air Hole" System in the body of the brush. It is a system of small holes made along the center shaft (at the root of the bristles, allowing heated air to circulate through the entire brush, all the way to the bristle roots. This eliminates the build-up of hair-damaging heat pockets, and it reduces the time and energy spent on blow drying.The perfect YS Park Brush to straighten hair with 100 % pure boar bristle.
$50.00 $43.00
Sale
Sold Out
Sale
Sold Out

Tara XM Cobalt Hair Cutting Shear

TARA XM Cobalt Hair Cutting shear is a new addition to the Tara line. Tara XM made in Japan designed with Cobalt Alloy Steel is a shear that will cut with power, and is also an excellent Dry Cut & Wet cutting plus great Slide cutting performance. Bottom Blade is designed with extra width to give enhanced slide cutting performance. The Tara XM is fitted with an anatomical (Bent) thumb for comfort, and permanent finger rest. Tension is fitted with an internal click screw that you can easily adjust with the Key that is provided.
$650.00 $625.00
Sale
Sold Out

Dynasty Left Handed Shear

Dynasty True Left handed Hair cutting shear is a great choice for the beginning stylist. Designed with Japanese 440-A Stainless Steel Alloy, and cast in China.This is an economically priced shear has an offset handle with removable finger rest. Tension is easily adjusted with a click tension knob. 3 sizes 5.0, 5.5, 6.0 inch, and a 30 Tooth Left Handed Thinner. This Dynasty Shear is light weight 1.3 oz for 5.0 1.4 oz for 5.5 inch, and 1.5 oz for 6.0 inch
$159.00 $139.00
Sale
Sold Out

YS Park 651 Luster Wood Styler

YS Park 501 / 651 Luster Wood Styler Brush has been updated and refreshed is now the YS 651 designed with a combination of Boar Bristles, and Nylon pins. YS 651 Bristles are arranged in a spherical pattern that each stroke reaches all the way to the scalp, without causing any irritation or discomfort. The offset handle is designed to prevent accidental contact with the client's head during use. Lightweight and easy to use. Check out the YS Park 701/ 851 for an all boar bristle version with no nylon pins.
$66.00 $55.00
Sale
Sold Out

Sensei Swivl Grip SW Rotating Thumb Professional Hair Cutting Shears

Sizes: 5.25 inch, 5.75 inch, 6.25 inch, 7.0 inch
$279.95 $229.95
Sale
Sold Out

Shisato Dynasty L-30 Thinner

Shisato Dynasty L-30 True Left Handed 30 Tooth Thinner is an affordable blending shear for the entry level stylist. Made in China with 440-A Stainless Steel Alloy. It has a comfortable Offset Handel design measures 5.75 inches, and weight is only 1.4 onces.
$159.00 $139.00
Sale
Sold Out

YS Park 701/851 Luster Wood Styler Brush

YS Park Luster Wood Styler Brush 851 refreshed, and up dated from the YS 701 with 100% pure boar bristles are arranged in a spherical pattern so that each stroke reaches all the way to the scalp, without causing any irritation or discomfort. The offset handle is designed to prevent accidental contact with the client's head during use. This  YS 851 brush is popular and effective with great control, comfortable in the hand, and ease of use.If you seek less tension on the hair that an all boar bristle brush provides, and are use to working with the pins look at the YS 501/651.
$85.95 $78.95
Sale
Sold Out

Tara KH DRG

Tara KH-DRG has a masterfully designed handle for maximum comfort, control, and freedom and to inspire creativity with movement.This handle is specially designed for fast moving cutting techniques,and speed cutting  Made with multi Alloy Miracle Steel The composition of this high grade steel which is a combination of Alloys including Super Cobalt Alloy, Carbon,Tungsten, Molybdenum and others.This combination of alloys allows the Tara KH-DRG to have a Rockwell hardness much higher that all other cobalt alloy shears. The hardness is near 70 on the Rockwell scale.This gives a very long lasting blade and edge. You can cut effortlessly on Wet or Dry hair. Cobalt Blue Blade is a striking,and dynamic. Make a statement with this one of a kind tool. Considered to be one of the best in class for TARA. 

Size: 6.3 inch
$1,599.00 $1,499.00
Sale
Sold Out

Sensei TAO TR550 TR625 Rotating Thumb Professional Hair Cutting Shears

Available Sizes: 5.5 inches, 6.25 Inches, 7 Inches
$999.95 $949.95
Sale
Sold Out

Mirage Charm Left Handed

Mirage Charm True Left Handed Hair Cutting Shear hand forged in Korea with Japanese V-10 Cobalt Alloy Steel. Charm is very comfortable as it allows for a neutral hand position with the offset Handel, and anatomical bent thumb. Each shear features a decorative charm on top of the finger ring. Blades are Convex for smooth cutting. Mirage Charm features thin blades for precision detail work, and point cutting 
$345.00 $309.00
Sale
Sold Out

YS Park 502 Super Straight Styler Brush

YS Park 502 Super Straight Styler Brush is a 2-in-1 100% Boar Bristel Brush This oval shaped brush is the result of combining a large diameter brush for straightening and a regular brush for adding curls. YS Park Air Hole System is a system of small holes made along the center shaft (at the root of the bristles, allowing heated air to circulate through the entire brush, all the way to the bristle roots. This eliminates the build-up of hair-damaging heat pockets, and it reduces the time and energy spent on blow drying.

$66.00 $58.95
Sale
Sold Out

Sensei TAO2 Professional Hair Cutting Shear

Sensei TAO2 Professional Hair cutting shear is a second generation shear by Sensei. This shear is  the way to do hair. They start with the most durable steel ever used to make a shear, American steel that was developed for the defense department.  This MVC material is then sent to Japan to be fashioned into a very sharp shear. The durability of the material prompted us to put a 5 year edge warranty on Tao shears.The blades pivot on sealed ball bearings for the ultimate blade stabilization. The Molybdenum Vanadium Carbide (MVC) steel the TAO2 is made from, is so strong, if we made a drill bit out of the material, we could drill though any other shear
$999.95 $979.95
Sale
Sold Out

Tara KKH-SRT

Tara KKH-SRT Rotating Thumb shear. Designed with comfort in mind, and to give high level performance. KKH-SRT made with Japanese Cobalt Alloy Steel, and convex edge to ensure smooth cutting. Has a click tension button for easy tension adjustment when needed.Rotating swivel thumb ring is fitted with a ball bearing for extra smooth effortless movement.If you are considering a swivel rotating thumb shear you should consider the KKH-SRT from TARA. 
$999.00 $949.00

FAQ's

Which shears are best for me?

Which steel sheer quality is better, those made in Japan, Korea, or Germany?

Japan has the highest standards for workmanship and quality with steels in hair cutting shears.

Many shears made in Korea which can save some costs on labor, and still maintain good quality.

Use steels from Japan. Look for Japanese Steel.

What metals are used in my scissor?

YIron, Carbon, Nickel, and various other alloys like cobalt, and manganese. When using stainless Steel Chromium is added to make steel Stainless, and prevent rust. Handles are welding to the blades and not constructed using the same quality steels. This is not necessary and would add to the cost.

What are the different categories of stainless steel used to produce hair cutting scissors?

Steels are important to a point in a scissor, and when combined with high-quality machining and design you have a beautiful cutting shear ready to provide excellent performance for many years or career depending on the quality of service the shear receives.

You should never purchase a scissor with a stainless steel rating of less than 440C. This is an industry-standard for stainless steel in hair cutting shears. There are a few entry-level shears made using 410, and 420.

Cobalt Alloy Steel is abrasion resistant and will give increased blade retention, and a longer last edge. These shears can also be machined to a finer edge and have the steel hold the edge the result of adding Cobalt Alloy.

They often cost more due to the increased labor costs of finishing and polishing and extra abrasives used in the finishing process.

Cobalt does have some categories and some companies use there own. They include Cobalt Alloy, ATS-314, V-1, V-10 and now they are using a powered Sintered Cobalt Alloy that is expensive but has excellent performance, and with the use of the sintered powered steel process has great quality control when producing it.

Is there a scissor that never needs to be sharpened?

This is fiction, and simply not true. There are high-quality steels that can hold an edge longer than others with the use of Cobalt Alloys but the longest we can see a shear used everyday cutting hair to last is about 18-24 months and most need to be serviced in about 12 months.

This depends some on the use of the shear how many cuts per day.

The wear resistance when cutting strands of hair is the same as cutting equal diameter strands of copper..! Hair is Keratinized Protein, soft and pliable with strong resistance to cutting.

Read more