Skip to main content
Phone: +800 375 3525

YS Park Tail Combs

YS Park Tail Combs,  Authentic and Genuine; at the best pricesthe best most efficient tails combs made. Accomplish more with less effort with a YS Park Tail comb. 
Sold Out

YS Park 101 Tail Hair Comb

YS Park 101 Tail Hair Comb. YS 101 has a Gradual Pitch Spacing between each tooth. It is gradually narrowed by 1/100 mm from the previous tooth as you mover away from the tail. With this design combined with the parting head (the first tooth of the comb is shortened), it creates equal tension through the length of the comb, allowing the user to gather and wind hair quickly. The YS 101 has standard teeth which is preferred for medium length hair.



 
$7.95
Sold Out

YS Park 102 Super Winding Tail Comb

YS Park 102 Super Weaving Winding Tail Comb has spacing between each tooth is gradually narrowed by 1/100 mm from the previous tooth.With this design combined with the parting head (the first tooth of the comb is shortened), it creates equal tension through the length of the comb, allowing the user to wind hair extremely quickly. Round point bottom of the comb is designed to get easy and smooth combing.The comb is made of super plastic which is heat resistance to 428 degrees F. Even when you want to comb quickly it will avoid friction.This comb will never peel off your cuticle.
 
 
 
$8.95
Sold Out

YS Park 103 Metal Tail Hair Comb

YS Park 103 Metal Tail Hair Comb. Spacing between each tooth is gradually narrowed by 1/100 mm from the previous tooth as you move away from the tail. With this design combined with the parting head (the first tooth of the comb is shortened), it creates equal tension through the length of the comb, allowing the user to wind hair quickly. What Makes This Comb Special is a curved top for smaller sections that may be needed when braiding or applying extensions.




 
$7.95
Sold Out

YS Park 104 Half Moon Tail Comb

YS Park 104 Half Moon Tail comb spacing between each tooth is gradually narrowed by 1/100 mm from the previous tooth.This creates equal tension on the hair through out the entire length of the comb in a single stroke.Plastic is heat resistance to 220 C (428 F). Parting head refers to the shortened first tooth of the comb, which enables the user to wind hair and section hair quickly and effortlessly.
$9.95
Sold Out

YS Park 106 Extra Long Tail Comb

YS. Park 106 Extra Long Tail Comb features gradual decreasing pitch where the spacing between each is narrowed by 1/100 mm from the previous tooth.This creates equal tension on the hair through the entire length of the comb.This allows the user to wind and hair quickly,and efficiently. YS 106 also has a parting tooth, which is a shortened first tooth to allow easy and efficient sectioning of hair.  

 
$10.94
Sold Out

YS Park 111 Quick Tint Tail Hair Comb

YS Park 111 Quick Tint Tail Hair Comb smooth and strong. Built from durable Ultem-plastic, which is 428°F resistant. Specially-sized for all cutting needs. Engineered with gradually-decreasing pitch 1/100 mm from the previous tooth to facilitate even tension through the entire length of the comb. Has a Parting head which is the shorten first tooth of the comb which allows the use to part, and wind hair very quickly.
 
 
$9.95
Sold Out

YS Park 116 Super Winding Pin Tail Comb

YS Park 116 Super Winding Pin Tail Comb. Smooth and strong. Built from durable ultem-plastic, which is 428°F resistant. Specially-sized 8.9 inch in length for all cutting needs. Engineered with gradually-decreasing pitch to facilitate even tension on the hair. With Gradual Pitch the spacing between teeth gets smaller as you mover away from the tail. YS 116 has very fine teeth.
$11.00
Sale
Sold Out

YS Park Extra Long 122 Tail Hair Comb YS-CM122 white black red

YS Park 122 Extra Long Tail Comb, is very similar to the 102 Tail Comb, has the same features but benefits stylists who use wider hair foil paper. The metal tail end is about 4.84 inches long. The total length is 9.8". This tail comb has the extra length when needed for quicker more productive work.Designed and made with Ultem plastic which is both durable, and flexible. A versatile comb for all types of cutting needs
$10.00 $9.95
Sale
Sold Out

YS Park YS-150 Teasing Comb

YS-150 Teasing Comb is designed for backcombing and teasing it has three rows of teeth. This comb is unique and the first teasing comb ever designed with these unique features. YS Park commitment for each user you to get the most out of each of their products, with minimum effort, and YS Park has done it again with this fantastic YS-150 comb. Available in 4 colors.
$15.00 $12.95

FAQ's

Which shears are best for me?

Which steel sheer quality is better, those made in Japan, Korea, or Germany?

Japan has the highest standards for workmanship and quality with steels in hair cutting shears.

Many shears made in Korea which can save some costs on labor, and still maintain good quality.

Use steels from Japan. Look for Japanese Steel.

What metals are used in my scissor?

YIron, Carbon, Nickel, and various other alloys like cobalt, and manganese. When using stainless Steel Chromium is added to make steel Stainless, and prevent rust. Handles are welding to the blades and not constructed using the same quality steels. This is not necessary and would add to the cost.

What are the different categories of stainless steel used to produce hair cutting scissors?

Steels are important to a point in a scissor, and when combined with high-quality machining and design you have a beautiful cutting shear ready to provide excellent performance for many years or career depending on the quality of service the shear receives.

You should never purchase a scissor with a stainless steel rating of less than 440C. This is an industry-standard for stainless steel in hair cutting shears. There are a few entry-level shears made using 410, and 420.

Cobalt Alloy Steel is abrasion resistant and will give increased blade retention, and a longer last edge. These shears can also be machined to a finer edge and have the steel hold the edge the result of adding Cobalt Alloy.

They often cost more due to the increased labor costs of finishing and polishing and extra abrasives used in the finishing process.

Cobalt does have some categories and some companies use there own. They include Cobalt Alloy, ATS-314, V-1, V-10 and now they are using a powered Sintered Cobalt Alloy that is expensive but has excellent performance, and with the use of the sintered powered steel process has great quality control when producing it.

Is there a scissor that never needs to be sharpened?

This is fiction, and simply not true. There are high-quality steels that can hold an edge longer than others with the use of Cobalt Alloys but the longest we can see a shear used everyday cutting hair to last is about 18-24 months and most need to be serviced in about 12 months.

This depends some on the use of the shear how many cuts per day.

The wear resistance when cutting strands of hair is the same as cutting equal diameter strands of copper..! Hair is Keratinized Protein, soft and pliable with strong resistance to cutting.

Read more