Skip to main content

Naruto Hibron Z Matic DS III Har Cutting Scissors Size 6.3

Naruto New Hibon Z Matic DS III Dry Hair Cutting Scissor from the  New Hibon Z Series. This  scissor features a more traditional offset set handle and look in design. This Naruto Matic DS III scissor is a 6.3 inch scissor designed with Sintered Powered Cobalt Alloy Steel, it has a dual disk bearing, and a shaft bearing Tension system. Designed for Excellent for Dry Slide cutting at the highest level not for wet cutting due design of tapered blades. Naruto Matic DS III  hair cutting scissor will Dry and  slide cut with great precision, and power. The quality of Naruto with its Sintered Cobalt Alloy Steel, and Artisan Craftsmanship will allow you to slide cut any section with ease. Below is an image of the bearing disk tension system that will reduce friction and allow user to cut smoothly with less effort, and thumb pressure. The Matic DS III scissor has both blades designed with a tapered bamboo leaf for DRY & Slide cutting only. Hair will run off the blades due to the taper design, but the cut is soft and without damage. Exceptional Dry and Slide cutting performance.  
 

Edge: Convex
Handel Type : Offset
Made In: Japan
Material: Sintered Powered Cobalt Steel
Size(s): 6.3
Tension: Bearing Disk Tension
Vendor: Naruto
Dry Cut : Dry Cut Only
$1,590.00 / Each
-
+
Vendor Naruto
Made In Japan
Material Sintered Powered Cobalt
Edge Convex
Tension Disk Bearing


It is difficult to accurately and completely convey the attention to detail and workmanship that goes into the design and manufacture of a Naruto Scissor. Naruto is the only Shear Company that Engineers it products to a degree that would be considered beyond it intended use and purpose.

Take the Step up and order an heirloom quality Naruto and take your cutting experience to a level beyond your expectations. All Naruto scissors include free name engraving in several different  fonts at no additional charge.
Use our Lay Away Program to invest in your skills, and career




                                                                                            
Size 6.3 inch

FAQ's

Which shears are best for me?

Which steel sheer quality is better, those made in Japan, Korea, or Germany?

Japan has the highest standards for workmanship and quality with steels in hair cutting shears.

Many shears made in Korea which can save some costs on labor, and still maintain good quality.

Use steels from Japan. Look for Japanese Steel.

What metals are used in my scissor?

YIron, Carbon, Nickel, and various other alloys like cobalt, and manganese. When using stainless Steel Chromium is added to make steel Stainless, and prevent rust. Handles are welding to the blades and not constructed using the same quality steels. This is not necessary and would add to the cost.

What are the different categories of stainless steel used to produce hair cutting scissors?

Steels are important to a point in a scissor, and when combined with high-quality machining and design you have a beautiful cutting shear ready to provide excellent performance for many years or career depending on the quality of service the shear receives.

You should never purchase a scissor with a stainless steel rating of less than 440C. This is an industry-standard for stainless steel in hair cutting shears. There are a few entry-level shears made using 410, and 420.

Cobalt Alloy Steel is abrasion resistant and will give increased blade retention, and a longer last edge. These shears can also be machined to a finer edge and have the steel hold the edge the result of adding Cobalt Alloy.

They often cost more due to the increased labor costs of finishing and polishing and extra abrasives used in the finishing process.

Cobalt does have some categories and some companies use there own. They include Cobalt Alloy, ATS-314, V-1, V-10 and now they are using a powered Sintered Cobalt Alloy that is expensive but has excellent performance, and with the use of the sintered powered steel process has great quality control when producing it.

Is there a scissor that never needs to be sharpened?

This is fiction, and simply not true. There are high-quality steels that can hold an edge longer than others with the use of Cobalt Alloys but the longest we can see a shear used everyday cutting hair to last is about 18-24 months and most need to be serviced in about 12 months.

This depends some on the use of the shear how many cuts per day.

The wear resistance when cutting strands of hair is the same as cutting equal diameter strands of copper..! Hair is Keratinized Protein, soft and pliable with strong resistance to cutting.

Read more