Skip to main content
Phone: +800 375 3525

Naruto HibonZ Nisuki Hessesy Lamool S31 Lefty Hair Thinning Scissors

Sizes: 5.8"

Made In: Japan
Material: Sintered Cobalt
Left Handed: Left Handed
Right Handed: Right Handed
Teeth: 31
Vendor: Naruto
$1,830.00 / Each
-
+

Vendor Naruto
Made In Japan
Material Sintered Powered Cobalt
Edge Convex


The Naruto HibonZ Series Nisuki Hennesy Lamool S31 Lefty Thinning shear is forged and hand crafted with an advanced sintered micro powered cobalt alloy steel, and then hand crafted to perfection for a cutting experience beyond your expectations. In this series; a three dimensional circular ride, for a soft and vendible packing is used in the bearing. Within this packing there are numerous indents so that the oil can penetrate and gain a softer touch for the perfect movement of the scissors.

The Hibon Z Nisuki Hennesy Lamool Thinner also includes a shaft bearing to the bolt to give a smooth and a light movement to the blades when cutting. These are the most advanced left handed hair cutting tools in the world. 
Every tooth has a curvature so that the hair slides out easily after cutting. The structure of the head of all the teeth is designed to be able to cut in sequence but almost irregularly at the same time, in order to have a natural finish without leaving a line where it was cut.

All the teeth have a double indented deposit on the head to trap the hair. The indents are in different levels means that the hair is not chopped off. This minimal difference makes it possible not to leave a line after cutting a slice or layer.All the teeth have a double indented deposit on the head to trap the hair. The indents are in different levels means that the hair is not chopped off. This minimal difference makes it possible not to leave a line after cutting a slice or layer.

NISUKI

Nisuki Teeth Design 
Hair Removal  20-25 %


Take the Step up and order an heirloom quality Naruto and take your cutting experience to a level beyond your expectations. All Naruto scissors include free name engraving in several different  fonts at no additional charge.

Use our Lay Away Program to invest in your skills, and career.
 

Disk Bearing Tension





















 

FAQ's

Which shears are best for me?

Which steel sheer quality is better, those made in Japan, Korea, or Germany?

Japan has the highest standards for workmanship and quality with steels in hair cutting shears.

Many shears made in Korea which can save some costs on labor, and still maintain good quality.

Use steels from Japan. Look for Japanese Steel.

What metals are used in my scissor?

YIron, Carbon, Nickel, and various other alloys like cobalt, and manganese. When using stainless Steel Chromium is added to make steel Stainless, and prevent rust. Handles are welding to the blades and not constructed using the same quality steels. This is not necessary and would add to the cost.

What are the different categories of stainless steel used to produce hair cutting scissors?

Steels are important to a point in a scissor, and when combined with high-quality machining and design you have a beautiful cutting shear ready to provide excellent performance for many years or career depending on the quality of service the shear receives.

You should never purchase a scissor with a stainless steel rating of less than 440C. This is an industry-standard for stainless steel in hair cutting shears. There are a few entry-level shears made using 410, and 420.

Cobalt Alloy Steel is abrasion resistant and will give increased blade retention, and a longer last edge. These shears can also be machined to a finer edge and have the steel hold the edge the result of adding Cobalt Alloy.

They often cost more due to the increased labor costs of finishing and polishing and extra abrasives used in the finishing process.

Cobalt does have some categories and some companies use there own. They include Cobalt Alloy, ATS-314, V-1, V-10 and now they are using a powered Sintered Cobalt Alloy that is expensive but has excellent performance, and with the use of the sintered powered steel process has great quality control when producing it.

Is there a scissor that never needs to be sharpened?

This is fiction, and simply not true. There are high-quality steels that can hold an edge longer than others with the use of Cobalt Alloys but the longest we can see a shear used everyday cutting hair to last is about 18-24 months and most need to be serviced in about 12 months.

This depends some on the use of the shear how many cuts per day.

The wear resistance when cutting strands of hair is the same as cutting equal diameter strands of copper..! Hair is Keratinized Protein, soft and pliable with strong resistance to cutting.

Read more