Naruto Variation Desert B-19 Tooth Hair Thinning Scissors

Naruto Variation Desert B-19 Tooth Hair Thinning Scissors

Naruto Variation Desert B-19 Hair Thinning Scissors have the highest percentage of variation, and character due the arrangement and spacing of the teeth. It is used mainly for giving texture and sculpturing the design of the hair style.The blending of the hair is completely natural and it creates volume to the silhouette with No Lines. These Variation Thinners have a several multiple steps cut into each tooth creating a beautiful effect with the hair. Naruto thinning scissors are developed for a handful of the most accomplished artists. Manufactured from a secret composition of Sintered Powered Cobalt Alloy Steel, and othe Alloys to give the smoothest cut possible. These shears display the absolute pinnacle of hand craftsmanship. The Naruto Variation is quite simply a true finishing experience with an an advanced tool. Designed with . The Workmanship and finish work are breath taking, and this is accomplished by experienced artisans who are dedicated to achieve simply the finest hair cutting tools made in the world, second to no one. Cut Ratio of 5-20%

The S model has teeth in front and the B is a reverse with teeth on rear blade.

Edge: Convex

Made In: Japan

Material: Sintered Powered Cobalt Steel

Teeth: 19

Vendor: Naruto

$2,120.00

$1,590.00

You Save:$530.00

Naruto Scissors
Sealed Ball Bearing Tension
Material: Sintered Powdered Cobalt Steel
No Line Blender
Vendor: Naruto
Origin : Japan

The Variation Series of Naruto's thinners are the 1st in the world to be assosiated with what is called the "Calculus of Variation". The varied path within a certain section or space of the teeth on the thinning blade allow the Variation Series achieve a constant but varied sequence in the section of hair that is thinned. Due to the calculated Variation of the tooth, it make is much easier for the stylist to obtain and control the flow of the hair. This creates a natural silhouette and natural finished look

Naruto Variation Series contains a double bearing system, the world’s 1st Vacuumed Sealed Bearings together with a shaft bearing. The design of the vacuumed sealed bearing system is made so that shaft bearings fits together as a unit. With this High Grade Advanced Tension System less friction is achieved giving a much better movement and operation to the scissors.

Size: 5.8 inch

FAQ's

Which shears are best for me?

Which steel sheer quality is better, those made in Japan, Korea, or Germany?

Japan has the highest standards for workmanship and quality with steels in hair cutting shears.

Many shears made in Korea which can save some costs on labor, and still maintain good quality.

Use steels from Japan. Look for Japanese Steel.

What metals are used in my scissor?

YIron, Carbon, Nickel, and various other alloys like cobalt, and manganese. When using stainless Steel Chromium is added to make steel Stainless, and prevent rust. Handles are welding to the blades and not constructed using the same quality steels. This is not necessary and would add to the cost.

What are the different categories of stainless steel used to produce hair cutting scissors?

Steels are important to a point in a scissor, and when combined with high-quality machining and design you have a beautiful cutting shear ready to provide excellent performance for many years or career depending on the quality of service the shear receives.

You should never purchase a scissor with a stainless steel rating of less than 440C. This is an industry-standard for stainless steel in hair cutting shears. There are a few entry-level shears made using 410, and 420.

Cobalt Alloy Steel is abrasion resistant and will give increased blade retention, and a longer last edge. These shears can also be machined to a finer edge and have the steel hold the edge the result of adding Cobalt Alloy.

They often cost more due to the increased labor costs of finishing and polishing and extra abrasives used in the finishing process.

Cobalt does have some categories and some companies use there own. They include Cobalt Alloy, ATS-314, V-1, V-10 and now they are using a powered Sintered Cobalt Alloy that is expensive but has excellent performance, and with the use of the sintered powered steel process has great quality control when producing it.

Is there a scissor that never needs to be sharpened?

This is fiction, and simply not true. There are high-quality steels that can hold an edge longer than others with the use of Cobalt Alloys but the longest we can see a shear used everyday cutting hair to last is about 18-24 months and most need to be serviced in about 12 months.

This depends some on the use of the shear how many cuts per day.

The wear resistance when cutting strands of hair is the same as cutting equal diameter strands of copper..! Hair is Keratinized Protein, soft and pliable with strong resistance to cutting.