MizutanI Acro Z2 Left Handed Hair Cutting Scissor

MizutanI Acro Z2 Left Handed Hair Cutting Scissor

Mizutani new Z2 Left handed scissor uses Nano technology to give you next level steel called Powder Cobalt Metal Steel which is actually know as Sintered Steel. This method uses high pressure to inject the mixture of alloys into the forging. It Consists of smallest participles, and using this method the manufacturer can obtain a very dense, and the highest quality steel. A very sharp shear with a long lasting blade with a super convex Hamaguri edge. Anatomical (Bent thumb ring for comfort) this shear can point cut, and cut with power small and large sections, and can be used as a go to shear for the bulk of your work. Blade design on Z2 will give more power due to the thicker saber blade desing,and micro step in the edge with give a longer lasting edge.

Made In: Japan

Material: Cobalt

Left Handed: Left Handed

Right Handed: Right Handed

Size(s): 5.5;6.0;6.5;7.0

Vendor: Mizutani

Select a size

Acro Type-Z2 5.5 inch Lefty ( $1,300.00 )

Acro Type-Z2 6.0 inch Lefty ( $1,300.00 )

Acro Type-Z2 6.5 inch ( $1,300.00 )

Acro Type-Z2 7.0 inch Lefty ( $1,300.00 )

Total: $1300.00

Powder Metal Steel (Sintered Steel)
Anatomical (Bent thumb ring for comfort)

Nano Powder Metal
Our Nano Powder Metal®, made with the new HIP manufacturing method (Hot Isostatic Pressing), is steel fabricated from a fine powder at the nano level. The uniform-grained powder is hardened with high temperature and pressure tempering, essentially eliminating all filler and impurities, and this method is used in precision manufacturing items like Blu-ray disc molds, where high levels of purity are required. At Mizutani, in order to create the ideal hair-cutting scissors, we have conducted our own proprietary research with this material, and created scissors with blades that combine strength with a long cutting life and the ultimate sharpness.

THRUST BALL BEARING
These are small, precision metal ball bearings with excellent axial load-bearing ability. Due to their design, which enables radial load-bearing as well, scissors open and close smoothly, which both lessens burden on the hands and contributes to a long cutting life. With anti-rust properties and durability as a matter of course, these bearings are a Japanese-made product.

FAQ's

Which shears are best for me?

Which steel sheer quality is better, those made in Japan, Korea, or Germany?

Japan has the highest standards for workmanship and quality with steels in hair cutting shears.

Many shears made in Korea which can save some costs on labor, and still maintain good quality.

Use steels from Japan. Look for Japanese Steel.

What metals are used in my scissor?

YIron, Carbon, Nickel, and various other alloys like cobalt, and manganese. When using stainless Steel Chromium is added to make steel Stainless, and prevent rust. Handles are welding to the blades and not constructed using the same quality steels. This is not necessary and would add to the cost.

What are the different categories of stainless steel used to produce hair cutting scissors?

Steels are important to a point in a scissor, and when combined with high-quality machining and design you have a beautiful cutting shear ready to provide excellent performance for many years or career depending on the quality of service the shear receives.

You should never purchase a scissor with a stainless steel rating of less than 440C. This is an industry-standard for stainless steel in hair cutting shears. There are a few entry-level shears made using 410, and 420.

Cobalt Alloy Steel is abrasion resistant and will give increased blade retention, and a longer last edge. These shears can also be machined to a finer edge and have the steel hold the edge the result of adding Cobalt Alloy.

They often cost more due to the increased labor costs of finishing and polishing and extra abrasives used in the finishing process.

Cobalt does have some categories and some companies use there own. They include Cobalt Alloy, ATS-314, V-1, V-10 and now they are using a powered Sintered Cobalt Alloy that is expensive but has excellent performance, and with the use of the sintered powered steel process has great quality control when producing it.

Is there a scissor that never needs to be sharpened?

This is fiction, and simply not true. There are high-quality steels that can hold an edge longer than others with the use of Cobalt Alloys but the longest we can see a shear used everyday cutting hair to last is about 18-24 months and most need to be serviced in about 12 months.

This depends some on the use of the shear how many cuts per day.

The wear resistance when cutting strands of hair is the same as cutting equal diameter strands of copper..! Hair is Keratinized Protein, soft and pliable with strong resistance to cutting.